-40%

UbiBot PT100 INDUSTRIALGRADE TEMPERATURE PROBE for WS1 Pro Model (-200 to 400 ℃)

$ 31.14

Availability: 500 in stock
  • Condition: New
  • Type: Temperature Humidity Probe
  • Country/Region of Manufacture: United States
  • Parameter(s) Measured: Humidity
  • All returns accepted: ReturnsNotAccepted
  • Model: PT100 USB
  • MPN: Does Not Apply
  • Brand: Ubibot
  • Interface: USB

    Description

    RS485 interface, matches with Ubibot WS1 Pro device. Waterproof thermocouple probe.
    Wide range of monitoring: -200 to 400 C. Suitable for industrial use cases.
    Instant readings: when connected with our device, you are able to view the data on the screen and have access to the online data via the app and the web console.
    Long term storage: Our platform offers free plan with 200 MB storage. Data synced to the platform can be stored up to 2 years with default settings.
    High Accuracy: Industrial-level chip. Accuracy: B level.
    This external probe is designed to use in extreme industrial conditions, such as steelworks, oil refinery plant. It can work in a wide range of -200 to 400 Celsius degree. The material of the probe is 304 stainless steel that is erosion-resistant in mild acid or alkalescent liquids.
    There are two versions of the plug: Micro USB and Audio plug. The Micro USB port is suitable for our sensing device
    WS1 Pro
    and the Audio plug is designed for the
    GS1
    device.
    The measurements are transferred to the devices, displayed on the large LCD screen and synced to the platform via network. So you can access the data instantly on the screen or remotely view them via our app or web console.
    You can be notified when the probe readings goes outside of the range you set previously. Therefore, you will have time to take actions before damage happens.
    Kindly reminder:
    The external sensors are disabled by default. Please enable them in the "Settings" page on the App or the console after inserting the probe into the device. In this case, the readings from the external probe are accessbile.
    Instructions:
    This external probe is designed to use in extreme industrial conditions, such as steelworks, oil refinery plant. It can work in a wide range of -200 to 400 Celsius degree. The material of the probe is 304 stainless steel that is erosion-resistant in mild acid or alkalescent liquids.
    There are two versions of the plug: Micro USB and Audio plug. The Micro USB port is suitable for our sensing device WS1 Pro and the Audio plug is designed for the GS1-AETH.
    The measurements are transmitted to the device, displayed on the large LCD screen and synced to the platform via network. So you can access the data instantly on the screen or remotely view them via our app or web console.
    You can be notified when the probe readings goes outside of the range you set previously. Therefore, you will have time to take actions before damage happens.
    How to connect to the device:
    1. Connect the probe to the device on-board port.
    2. Press the menu button to switch the screen display. The cursor will flash and stop at E-T. Then the on-screen readings are from this probe.
    3. To view it on the app or the web console, you can press the power button once to trigger data sync.
    Specifications
    Monitoring range:
    -200 to 400℃
    Accuracy:
    ±(2%+1℃)
    Length of probe:
    200mm
    Diameter of probe:
    5mm
    Length of lead:
    3m
    Nominal Input voltage:
    5v-12v
    Connector:
    Micro USB
    Communications protocol:
    ModBus RTU
    Waterproof rate of the probe:
    IP 68
    FEATURES
    Instant Readings on the Screen of Ubibot Device
    By connecting the probe to our device, it's readings can be viewed on the screen instantly. At the same time, all the data is synced to the platform for wireless view via the app and stored securely. Long term free storage allows you to track the history much easier than before.
    Works in Extremely Hot and Cold Conditions
    To meet the demand of some industrial environments, the probe is embedded with industrial sensors that can monitor -200 to 400 C. Stainless steel probe is featured of erosion-resistant in mild acid or alkalescent liquids.So, its application can also be in chemistry field.
    RS485 Interface, Ready to Use Connector
    Unlike other probes on the market, we have made the probe ready to use with either USB connector or audio plug connector. The RS485 interface is suitable for the requirements of most of industries. Either select Ubibot, or you can integrate the probe to your own devices.
    Comparison of Ubibot Probes